To Make a Covering Unfinished Basement Walls With Fabric

Published On August 12, 2018 | By penulis | DESIGN

To covering unfinished basement walls with fabric, let’s starting with measure the height of the basement. These from floor to ceiling along with the length of the area where you wish to place on the wall. Select curtains of appropriate size to cover this area. You can also use plain fabrics. Install an eye hook that sits on a foundation wall at one end of where you want to place the fabric wall. Place eyelash approx. 1 inch below the ceiling. Form a starter hole with a drill machine if necessary.

Affordable Covering Unfinished Basement Walls With Fabric

Affordable Covering Unfinished Basement Walls With Fabric

Hold a laser level at the point of the hook eye for covering unfinished basement walls with fabric. And have someone stand across the room to mark the point just above the eye hook on the opposite foundation wall. Install another eye hook at that time. Cut a piece of fly wire that measures the distance between the eye hooks plus 10 inches. Thread 5 inches of airplane wire through one of the eye hooks. Fold 5-inch wire over so it touches second piece of air conduit.

12 Photos Gallery of: To Make a Covering Unfinished Basement Walls With Fabric

Image of: Why Covering Unfinished Basement Walls With Fabric

Image of: Used Covering Unfinished Basement Walls With Fabric

Image of: Trendy Covering Unfinished Basement Walls With Fabric

Image of: To Hang Covering Unfinished Basement Walls With Fabric

Image of: Inspiring Covering Unfinished Basement Walls With Fabric

Image of: Diy Covering Unfinished Basement Walls With Fabric

Image of: Covering Unfinished Basement Walls With Fabric Ideas

Image of: Covering Unfinished Basement Walls With Fabric for Party

Image of: Cheap Covering Unfinished Basement Walls With Fabric

Image of: Best Covering Unfinished Basement Walls With Fabric

Image of: Beautiful with Covering Unfinished Basement Walls With Fabric

Image of: Affordable Covering Unfinished Basement Walls With Fabric

Use a wire-rope clip to hold them together. Thread 5 inches of thread at the opposite end through a spindle, fuse with another wire rope clamp. Place the hook of the wire frame into the opposite eye hook on the foundation wall. Tighten the tightening nut until the thread is as tight as possible. Hang fabric or curtain walls instead by attaching curtain clips to the wire and then to the material. Stretch the fabric until it spans the length from one side to the other. Creating a new wall in for covering unfinished basement walls with fabric.

Comments are closed.